Hello folny,
please tell me what hardware are you using.
I am a very busy man and have no time to debug other problems in deep.
Regards, Ottmar
Hello folny,
please tell me what hardware are you using.
I am a very busy man and have no time to debug other problems in deep.
Regards, Ottmar
Hello Ottmar
I use hardware Teensy 3.1 and WIZ820io ethernet module.
Lustig .. gibt eigentlich keinen vernünftigen Grund warum der Menüpunkt nichta ngezeigt werden sollte ... Firefox wird einfach seit Version 1 von Monat zu Monat schlechter irgendwie .. ich weiss schon warum ich den nicht besonders mag
Hi Seddi
Jinx is limited to a maximum of 16 universe ?.
Hi Seddi
Jinx is limited to a maximum of 16 universe ?.
No, there is only a pixel limit of 24576 pixels.
When you mark Bordcast / Multicast I can add no more than 0-15 universe and further let me now add another universe do not know where it can bit a problem ?.
Welcome to Artnet. Artnet has only 16 universes per subnet/net, so you have to use subnet and net parameters, look at the artnet specs. Artnet only has 4 bit for the universe, but with subnet and net you can carry 32000 universes via artnet, that has nothing to do with Jinx! or any limitations inside it, that is how Artnet works.
So after 0/0/15 the next universe in Artnet has the address 0/1/0.
Look at page 3: http://www.artisticlicence.com/WebSiteMaster/User Guides/art-net.pdf
I thought that it would be as it is in the program Madrix there is added simply Universe 0 - 256
Yeah, thats wrong in Madrix ... they are setting subnet and universe at once, so Universe 16 in Madrix will sent out Subnet 1/Universe 0 which is technically the same, but not following the artnet adressing rules in the specs.
If you have licensed Artnet Devices they will use Net(7 Bit 0-127)/Subnet(4 Bit 0-15)/Universe(4 Bit 0-15) when thye support Artnet3, or Subnet/Universe if they are using Artnet2. So Madrix also only supports Artnet 2.
So heute ist es endlich soweit, nach langer Arbeit habe ich heute die Version 2.0 released.
Jinx! besitzt nun 4 weitere Effekt Generatoren, so dass wir insgesamt 8 zur Verfügung habe. Dadurch wurde auch die Szenenspeicherung geändert, man kann nun full (aller 8 generatoren) oder half scenes (nur 4 generatoren, also eine Seite) speichern. Die half scenes lassen sich dann auch auf beiden Seiten von Jinx! laden, so dass nun einzelne Szenen auch mit dem Mastercrossfader übergeblendet werden können. Dies ist natürlich auch in der Chase Engine berücksichtigt.
Die Remote Control verfügt nun über 8 Kanäle, so dass hier auch die Szenen links/rechts zugeordnet werden können, sowie auch der crossfader und der crossfade mode gesteuert werden kann. Ausserdem gibt es für die Remote Control nun auch eine voll patchbare Midi-Unterstützung.
Eine weitere Neuerung sind Effect Regions. Es kann nun für jeden Generator eine Region eingestellt werden, sprich der Effekt von der Grösse und Postions her frei auf der Matrix plaziert werden, so kann man die Matrix segmentieren oder einfach nur coole neue Effekte damit zusammen stellen.
Viel neues gibt es auch in der Oberfläche. Da mir die klassische Windows Oberfläche, so sehr ich sie auch mag, bei Live Einsätzen am FOH Platz zu hell ist, gibt es nun auch eine custom gui die man selbst colorieren kann. Selbstverständlich kann aber auch auf die klassischen Windows Controls zurückgeschaltet werden.
Hier ein kleiner Changelog mit ein paar Anmerkungen zur Bedienung, bitte schaut auch in die Onlinehilfe/das Handbuch für weitere Informationen:
Das sollte es im Grossen und Ganzen gewesen sein. Ich wünsch euch viel Spass damit und dank euch für die vielen Anregungen und Ideen die ihr mir immer wieder zukommen lasst.
Grüße
Sven
Download unter: live-leds.de - Direktlinks im ersten Post
Special thanks for Effect Regions!
Is ja typisch .. man testet Wochenlang, dann macht man einen Release und prompt findet man am gleichen Tag 2 Bugs
Ich sammle mal nochmal einen Tag ob sonst noch was auftaucht und schieb dann einen kleinen Bugfix hinterher ...
Wie angekündigt, habe ich gerade die Version 2.01 auf die Homepage geladen um die gefundenen Bugs zu fixen.
Grüße
Sven
Download unter: live-leds.de - Direktlinks im ersten Post
Jinx 2.0 and 2.01 crashes when I open a file created in an earlier version. Windows 8.1 64bit.
Perhaps the reason is not in the version of the file, but in the output device. When I create a new file in new Jinx, when it starts output, crashes again. I use Enttec Open DMX USB. With another devices that does not happen.
Hmm .. that should not happen .. Can you send me the .jnx file ? There didnt really change something in the output section ...
Is the OpenDMX connected and is the Com Port set to the right port ? Normally it should not happen even if its connected or not .. but I cant imagine where it should crash if its connected correctly. I will check it ... but this should happen in former version of Jinx! as well, because there is nothing changed in this sections.
//EDIT
Thats really weired ... nothing changed inside this section, but it crashes inside the stack if you try to use the ftdi driver for enttec opendmx ... Im searching for it ...
@godkiller
Found the bug, that its not working for the OpenDMX is absolutely random, I wrote 9 region settings into an array for 8 regions and so another part of the stack gots overwritten. I will post a fixed version this evening. There had been another region bug, where the position didnt work when the region had the same width as the matrix. So 2.02 will come this evening ...
Kein scroll effekt beim image viewer dazu gekommen, schade
Kein scroll effekt beim image viewer dazu gekommen, schade
Diesmal waren grössere und wichtigere Dinge dran, die die Software vorwärts bringen und viele neue Möglichkeiten bringen. Transitions habe ich auf der Liste, mal sehen wann, was und wie ich das mache ... hab aber zuvor noch ein paar andere Dinge mit höherer Priorität auf der Liste
Ich übe mich in Geduld und warte ab, vielleicht dann ja mal irgendwann
Soeben die Version 2.02 hochgeladen. Folgende Bugs sind behoben worden:
-Regions mit der vollen Matrix Breite haben die Y-Position ignoriert
-Speicherverletzung führte zu Programmabstürzen beim Enttec OpenDMX interface
-Im Fastpatchdialog wurde die Anzeige des Startpixels abgeschnitten
Grüße
Sven
Download unter: live-leds.de - Direktlinks im ersten Post