Hello; and congratulations on your project.
I have to do something similar with an LCM-60; I tried to look at your circuit diagram; but some points are not clear to me how they are connected with esp; would you be so kind to add some more detail in the diagram? thank you very much;
I will try to study again to understand better.
Thank you.
Antonino
Excuse me but I can not insert the photos well in the forum;
I inserted a link with an album; I hope now you can see all the photos.
Hello everyone, I wanted to show you my little lamp project for my room.
The project was oriented to obtain a very soft and uniform lighting; so I decided to orient myself for indirect lighting;
I started to develop the idea through 3D drawing; to get a better idea of the final dimensions and how to structure the whole.
[Blockierte Grafik: https://photos.app.goo.gl/D9aUxMR8mAMcpwLF9]
https://photos.google.com/shar…fTWtBZFE4N20yX3EtbDNZbHRR
I leave the link to see the photos of the whole project, unfortunately I can not load the photos well inside the forum.
I already had the power supply so I decided to use this hardware:
1x Meanwell LCM-60DA
5x LED Strip 21 Samsung LM301B 3000K
1x Sonoff CH4 Pro R2
1x Wooden board 100 * 50 cm
~ 3mt of chain
2x 9mm wall plugs
5 aluminum heat sinks made from 40mm * 4mm strip
The total price is around € 110
The chandelier is dimmable by 1 button on the wall; or via wifi / internet command via Sonoff; unfortunately the Sonoff CH4 can set a minimum push time of 1second that does not work to do on / off the power supply
so I had to change the electrical connection; and I added a switch on the 220V to power down everything from the wall.
Also I thought to turn on or off the LED in direct diffusion through the app; to switch it on using the wall controls, use the switch to turn it off. (the sonoff is set to always reset the contact to put the 5 LED in series, the exchange takes place very quickly and is not annoying at all.
The room is about 5x4 meters large
At the corners at a height of 40cm from the ground I measured ~ 320 lux at maximum intensity (all led strings at 1000mA driven) dimming to the minimum we have about 30lux
The result is a very uniform light throughout the room; the average illuminance is a lot.
am very happy with the quality obtained; moreover the system, besides being very powerful, is very efficient, besides the LEDs do not need heat sinks; I wanted to exaggerate to make sure that the dissipation would never have had any problem even in the summer. 
Hope you like it!
One thing; I got all the LED strips from led-tech all quite bent; I had to put them all straight back so I could fix them well. I think it's the fault of the production process
Antonino
