Forgive me, if this is in the wrong part of the forum. My previous question was about universes and almost stains, and I think I found that out. 510 to 384, which gives me 16 * 8 matrices and all I had to do was double the amount of universes. So I entered Universe 0 - 15 and then I tried to enter 16 and Jinx! I would not let it enter. So how do I get higher? Change subnet? Suggestions would be helpful.
Many Thanks,
WilhelmForgive my syntax; I use a translator program to write in English and then translate into German. I've created a 128x64 matrix consisting of (32) 16 * 16 ws2812b panels. So I need at least 48 universes running through artnet into a Falcon F16v3.
My first question: When I start using the fast patch, I want the first 510 (universe 1) channels of the matrix to begin at 16.1 and the signal path then follow the column to 1.1 over 1.2 and then to 16.2 and so on. I have tried different combinations and always seem to get the same results. The last green box stops at 10.11, as if I had started typing at 1.1. My thought is that my endpoint should be 7.11. Any idea what I'm doing wrong?
Second question: If I start the second 510 channels, my starting point should be 6,11. Do I just enter the same parameters as in the previous universe, but with a new starting point and a new universe? Is the program also smart enough that when I arrive at the end of 128th column: 128.1 and the universe is not finished yet, the program knows that it has to finish the universe starting at 32.1? Or in the end I only have a small universe and start a new universe starting at 32.1?
thank you in advance
Wilhelm
I was finally able to use Jinx! to it's optimum level last night and spent most of the night creating light shows for my cats 
I did see Jinx! allows .avi's to be imported. Do I need to create a folder or a subfolder within the Jinx! folder to run .avi's or can I import from any folder on my computer? Or maybe a better question would be; where should I import from to create a more stable running program.
Thanks,
William
I literally came to this forum for the same idea. I built a 128*64 led matrix using ws2812b led's. It is about the same size as a 55 inch tv. It is going to be my bands banner, light fixture and also show static pictures and some basic .avi's.
thank you so very much!
Greetings! Unfortunately I am not able to use Jinx!, so I have come here. I have a 128*64 matrix that is running off of LED Edit. I was told by the maker of the Ethernet controller that the controller would not work with Jinx! This was after I bought them of course. I have found that I can use the snapshot mode in LED Edit and what ever I see through the window shows up on my matrix. The problem is in within Jinx! I have the option of specifying the spacing between LED's. Even at 1, my matrix tries putting in the spacing because it can "see it". Is there a way to put no spacing between the LED's within Jinx!, thus having a solid image. Thus I could technically use Jinx! for my crappy cover band and have cool light shows.
Thank you in advance
William